Jeep 2014 Cherokee - User Guide Bedienungsanleitung PDF herunterladen (Seite 141)

CAUTION!

It is necessary to follow these steps to be certain that the power transfer unit is fully

in NEUTRAL (N) before recreational towing to prevent damage to internal parts.

WARNING!

You or others could be seriously or fatally injured if you leave the vehicle

unattended with the power transfer unit in the NEUTRAL (N) position without first

fully engaging the parking brake. The NEUTRAL (N) position disengages both the

front and rear driveshafts from the powertrain and will allow the vehicle to move,

even if the transmission is in PARK. The parking brake should always be applied

when the driver is not in the vehicle.

Shifting Out of NEUTRAL (N)

Use the following procedure to prepare your vehicle for normal usage.

1. Bring the vehicle to a complete stop, leaving it connected to the tow vehicle.

2. Apply the parking brake.

3. Turn the ignition switch to the ON/RUN position, but do not start the engine.

4. Press and hold the brake pedal.

5. Shift the transmission into NEUTRAL.

6. Using a ballpoint pen or similar object, press and hold the recessed Power

Transfer Unit NEUTRAL (N) button (located by the selector switch) for one

second.

7. When the NEUTRAL (N) indicator light turns off, release the NEUTRAL (N)

button.

8. After the NEUTRAL (N) button has been released, the Power Transfer Unit will

shift to the position indicated by the selector switch.

9. Shift the transmission into PARK.

10. Release the brake pedal.

UTILITY

139

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 203 204

Keine Kommentare

Jeep 2014 Cherokee - User Guide Bedienungsanleitung Seite 141