Jeep 2014 Cherokee - User Guide Bedienungsanleitung PDF herunterladen (Seite 140)

Shifting Into NEUTRAL

• Use the following procedure to prepare your vehicle for recreational towing.

1. Bring the vehicle to a complete stop and shift the transmission to PARK.

2. Turn the engine OFF.

3. Turn the ignition switch to the ON/RUN position, but do not start the engine.

4. Press and hold the brake pedal.

5. Shift the transmission into NEUTRAL.

6. Using a ballpoint pen or similar object, press and hold the recessed NEUTRAL

(N) button (located by the selector switch) for four seconds. The light behind

the NEUTRAL (N) symbol will blink, indicating shift in progress. The light will

stop blinking (stay on solid) when the shift to NEUTRAL (N) is complete.

7. After the shift is completed and the NEUTRAL (N) light stays on, release the

NEUTRAL (N) button.

8. Start the engine.

9. Shift the transmission into REVERSE.

10. Release the brake pedal for five seconds and ensure that there is no vehicle

movement.

11. Shift the transmission to NEUTRAL.

12. Apply the parking brake.

13.

Shift the transmission into PARK, turn the engine OFF and remove the Key Fob.

14. Attach the vehicle to the tow vehicle using a suitable tow bar.

15. Release the parking brake.

NOTE:

• Steps 1 through 5 are requirements that must be met prior to pressing the

NEUTRAL (N) button, and must continue to be met until the shift has been

completed. If any of these requirements are not met prior to pressing the

NEUTRAL (N) button or are no longer met during the shift, then the NEUTRAL (N)

indicator light will flash continuously until all requirements are met or until the

NEUTRAL (N) button is released.

• The ignition switch must be in the ON/RUN position for a shift to take place and

for the position indicator lights to be operable. If the ignition switch is not in the

ON/RUN position, the shift will not take place and no position indicator lights will

be on or flashing.

• A flashing NEUTRAL (N) position indicator light indicates that shift requirements

have not been met.

UTILITY

138

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 203 204

Keine Kommentare

Jeep 2014 Cherokee - User Guide Bedienungsanleitung Seite 140